Medidor trifásico de relación de transformación (TTR) a batería
Medidor TTR trifásico a batería: relación, grupo de conexión y polaridad en unos 10 segundos con una sola conexión, relación 0.9 a 10,000, 3.5 kg.
Métodos de prueba según IEC 60076
Métodos de prueba según IEC 62271-100
Métodos de prueba según IEEE 400.2 · IEC 60502
Métodos de prueba según IEC 60060-1 · IEC 60270
Métodos de prueba según IEC 60255 · IEC 61850
Métodos de prueba según IEC 61869
Métodos de prueba según IEEE 81
Métodos de prueba según IEC 60896
Productos y soluciones
Explore todos los instrumentos HUAC según el equipo que prueban. Filtre por palabra clave, modelo, norma o tipo de cliente.
62 productos
Medidor TTR trifásico a batería: relación, grupo de conexión y polaridad en unos 10 segundos con una sola conexión, relación 0.9 a 10,000, 3.5 kg.
Fully automatic three-phase turns ratio tester with colour screen and blind test: ratio, vector group and polarity, ratio up to 10,000, battery or AC powered.
Single- and three-phase transformer turns ratio tester with vector group, blind test and built-in thermal printer. Ratio 0.9 to 5000, 4 kg, 220 V AC.
Medidor de resistencia de devanados de 40 A, de 0.1 mΩ a 25 kΩ, ±0.2 %, con pantalla táctil de 7 pulgadas, impresora y verificación automática de estabilidad.
Medidor automático de tangente delta y capacitancia con fuente integrada de 10 kV y antiinterferencia 45/55 Hz, para transformadores, TTC y otros equipos de AT.
Medidor SFRA de deformación de devanados con PC industrial integrada: barrido lineal y segmentado de 10 Hz a 10 MHz, diagnóstico automático, informes en Word.
FRA winding deformation tester connected to a laptop by USB: sweep to 10 MHz, expert diagnosis software, under 60 seconds per phase, no need to open the tank.
Combined winding deformation tester using frequency response analysis and low-voltage short-circuit impedance for medium and large power transformers.
Measures transformer short-circuit impedance at low voltage and compares it with the nameplate to detect winding deformation. Class 0.2, 5–400 V, 0.1–20 A.
Analizador de OLTC para tiempo y resistencia de transición, forma de onda y sincronismo trifásico, con marcado automático de fallas, pantalla táctil e informes Word.
Lightweight 5 kg OLTC tester for transition waveform, time, resistance and three-phase synchronism, with 5.7-inch screen and USB storage.
OLTC tester for transition time, waveform, resistance and three-phase synchronism: 9 A current source, 0.01 ms resolution, 800×480 touch screen, printer.
Three-channel OLTC analyzer recording A, B and C phases at once: transition waveform, time, resistance and synchronism, with printer and 128 waveform memory.
Transformer capacity, no-load and load-loss tester with 7-inch touch screen: checks distribution transformer capacity and energy efficiency class on site.
Battery-powered transformer capacity and loss tester with built-in three-phase source: capacity, no-load and load loss, impedance voltage, 4.5 kg.
Transformer test bench for no-load current and loss, short-circuit voltage and load loss, with harmonic analysis, vector display and thermal printer.
Identifies copper or aluminium windings and measures capacity, losses and DC resistance of transformers. Battery powered, 7-inch touch screen.
Measures AC impedance and characteristic curves of generator rotors; also for single-phase transformer no-load and short-circuit tests. 600 V, 120 A, printer.
Medidor automático de rigidez dieléctrica del aceite de transformador, 0–80 kV: sube, mantiene, agita, reposa, calcula e imprime la tensión de ruptura y el promedio.
Fully automatic insulating oil acid value tester using the extraction method: 1–6 samples per run, 0.002–1 mg KOH/g, automatic cleaning and printing.
Analizador de interruptores para tiempos, rebote, recorrido, velocidad y corriente de bobina, con fuente de 6–270 V, pantalla táctil de 9", impresora y Bluetooth.
12-channel circuit breaker analyzer with mobile app control over Bluetooth, 7-inch sunlight-readable screen, built-in 20–270 V supply and printer.
12-channel circuit breaker timing and travel tester with dry contact outputs, built-in DC 20–270 V supply, linear and rotary sensors, -20 to +50 °C.
Circuit breaker timing, reclosing, bounce, speed, travel and coil current tester for 12 breaks, with built-in DC 0–300 V / 20 A operating supply.
Circuit breaker characteristics tester for SF6, GIS, vacuum and oil breakers: all data from one operation, built-in printer, PC software for reports.
Portable circuit breaker tester for 12 breaks: timing, synchronism, bounce, speed, travel and coil current, built-in DC 30–250 V supply and printer.
Portable circuit breaker analyzer for the mechanical characteristics of vacuum, SF6, low-oil and oil switches, for substations up to 500 kV.
Medidor de resistencia de contacto de 200 A CC para interruptores y seccionadores: 50/100/150/200 A, resolución 0.01 µΩ, ±0.2 %, prueba de 5–599 s, impresora.
Non-destructive vacuum interrupter tester using the magnetron discharge method: 10⁻⁵ to 10⁻¹ Pa, no disassembly, printer, RS232, about 12 kg.
100 A DC loop resistance tester for high-voltage switchgear: 50/100 A, 0.01 µΩ resolution, ±0.2 %, printer and RS232, 6 kg.
Portable DC power supply for circuit breaker tests: 6–270 V adjustable, 20 A, close/trip pulses and motor supply, with voltage-drop compensation.
Dual-channel SF6 density relay tester: alarm, lockout and over-pressure points converted to 20 °C, 0–0.9 MPa, class 0.25, colour touch screen, battery.
SF6 moisture meter measuring dew point -80 to +20 °C (0.04–23,700 ppm) in about 2 minutes, with self-calibrating sensor, touch screen and battery.
Factory test bench for HV and LV switchgear: fixed and adjustable AC/DC supplies to power and check panels before delivery, to GB 14048.
Measures the spring pressure of switchgear tulip contacts: up to 1000 N, ±1 % FS, 33–107 mm, 5-inch touch screen, printer, 8 h battery, under 3 kg.
Localizador de fallas por puente de Murray con fuente de corriente constante de 15 kV, para fallas de cubierta, rupturas de alta resistencia y bajo aislamiento.
Complete cable fault locator for power cables up to 110 kV: TDR, multi-pulse and arc reflection prelocation, 32 kV surge supply and acoustic pinpointer.
Portable cable fault distance tester: low-voltage pulse (TDR) up to 8 km and pulse current method up to 128 km, 200 MHz sampling, sunlight-readable screen.
Field tester for cable on the reel: conductor DC resistance, length (30 m–50 km), resistance per metre and effective cross-section, Bluetooth, battery.
Transmitter and receiver for tracing buried cables and metal pipes: route, depth, current, cable identification, ground fault location, 12 active frequencies.
0.1 Hz withstand and tan delta diagnostics for medium-voltage cable networks.
Pruebas de tensión soportada de CA en cables, celdas y transformadores de 10 kV, con sintonía de resonancia en cualquier punto de 30 a 300 Hz.
Locate insulation defects in switchgear, cables and rotating machines before they fail.
XB series resonant test system, 20–300 Hz, Q > 50, distortion < 1 %, units under 40 kg, for AC withstand tests on cables, transformers, GIS and generators.
Transformador de prueba a frecuencia industrial con consola de control, salida nominal de 0–430 kV, para pruebas de tensión soportada de CA; CC con pila rectificadora externa.
Battery-powered insulation resistance tester with 1, 2.5, 5 and 10 kV test voltages, 1 MΩ to 199.9 GΩ, guard terminal, rugged case, about 1 kg.
Cascade AC hipot test set with two oil-immersed transformers for 150 kV AC withstand tests on transformers, cables and insulators. 220–380 V, 50/60 Hz supply.
Smart AC/DC high voltage divider for 100 kV with RC equal-potential shielding, a separate digital meter, accuracy up to 0.5 % and a 9.5 kg portable case.
Pruebas de tensión soportada de CA en cables, transformadores, GIS y equipos de transmisión de 110 y 220 kV, con reactores modulares que sintonizan de 30 a 300 Hz.
1500 kVA series resonant test system with up to 500 kV output for AC withstand tests on GIS, switchgear and transformers up to 220 kV, in the lab or on site.
216 kVA series resonant test system with up to 108 kV output for AC withstand tests on cables, transformers, GIS and generators, tuning from 30 to 300 Hz.
AC withstand testing of 35 kV cables, transformers and switchgear, tuning to resonance anywhere from 30 to 300 Hz.
75 kVA resonant test system for AC withstand and partial discharge tests on cables, transformers, GIS and generators, with 25 kV / 3 A or 75 kV / 1 A output.
810 kVA series resonant test system with two output levels, 270 kV / 3 A or 27 kV / 30 A, for AC withstand tests on cables, transformers, GIS and generators.
Variable frequency series resonant test system, 30–300 Hz, with multi-stage reactors for AC withstand tests on 10 kV and 35 kV cables, transformers and GIS.
Equipo de prueba de relés con 6 salidas de tensión y 6 de corriente, amplificadores lineales, 30 A por fase o 180 A en paralelo, fuente auxiliar CC y software de PC.
Analizador automático de TC y TT: excitación, relación, polaridad, resistencia de devanado y carga; puntos de codo de hasta 60 kV por baja frecuencia, menos de 9 kg.
Analizador de TC/TT de frecuencia variable: excitación, curvas de error, relación, polaridad, carga y parámetros transitorios, fuente de 50 A, impresora, 10,000 resultados.
Voltage-method CT and VT ratio and polarity tester: CTs up to 25000/5 A, VTs 2.2–220 kV, ±0.2 % of reading, no heavy-current source needed.
Multi-channel cell discharge, charge and balancing for lithium battery packs in EVs, buses and energy storage: 1–4.2 V, up to 5 A per channel, touch screen.
Constant-current capacity testing of substation and UPS battery banks.
Mostrando 12 de 62
Solicitar cotización
Un ingeniero de ventas responde en un día hábil.O escriba asales@huactester.com.